Erratum to “Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies”

Abstract

Damaged or broken parts are generally too expensive to replace, or are no longer available. RE can be defined as: 'Systematic evaluation of a product with the purpose of replication. This involves design of a new part, copy of an existing part, recovery of a damaged or broken part, improvement of model precision and inspection of a numerical model. Advantages of the technique include immediate feedback, data reduction, direct generation of geometry and higher precision of the final product. This paper shows some possibilities of use and benefit from utilising the RE-methodologies and techniques in production process, especially in the case when exists parts without 3D-CAD support. This paper, which defines obtaining CAD data step by step from damaged three different parts to reproduce or make a new design for some recoveries, has not get any technical drawings. When these parts had been recovered, some problems occurred. These problems have been solved by referring to some practical approaches. Establishing continuity across curve and surface patches is an important concept in the free form surface modeling. The CAD models were recovered and reconstructed to consider parametric and geometric continuity. The iso-phote method was used for surface continuity analysis. Hence, in this work, not only occurring problems but also solving methods were explained. Firstly, CAD models are created from damaged and broken parts by data digitization method by using CMM and the process was explored in detailed. Later, CAD models that had been obtained earlier are transferred into CAM module of the software and G codes are taken by the NC post-processor, and finally, the parts are manufactured by means of CNC milling machine. Additionally, this paper presents a review of the part digitization techniques available for reverse engineering.