Erosion rates in badland areas recorded by collectors, erosion pins and profilometer techniques (Ebro Basin, NE-Spain)

Abstract

In badland areas of the Ebro Basin, in a semiarid climate, two erosion plots (257 m 2; 5° slope and 128 m 2; 23° slope) on exposed Tertiary clays were monitored over two years (Nov. 1991–Nov. 1993). This material is characterized by high sodium absorption ratios which lead to high soil dispersivity. The dominant erosion processes in both plots are rilling and sheet erosion. Rainfall intensity was recorded at a weather station, connected to a data-logger, sediment production for single events was collected in tanks, and ground lowering was measured every six months by erosion pins and microtopographic profile gauge techniques. Significant runoff was produced only by rainfall events above 5 mm. Another threshold at 20 mm rain was noted. For rainfalls higher than 20 mm, the 23° slope plot shows a greater runoff response than the 5° one. Rainfall events exceeding this threshold showed a higher sediment production for the steeper slope. In the relationship between precipitation and sediment concentration, an envelope curve can be drawn indicating that any rainfall event of a given amount and intensity has a maximum sediment concentration which we speculate to be a function of the runoff sediment transport capacity. Runoff response and sediment yield in the studied plots are controlled by the rainfall and soil characteristics and their seasonal variations. In both plots, the erosion pins show that erosion rates in rill areas are 25–50% higher than in the interrill areas. Sediment yield recorded by collector devices was higher than the rates measured by erosion pins. The erosion rates based on rill cross-sections by profilometers were higher than the ones recorded by collectors.