Abstract
It has been shown that the premixed abrasive water jet system, in which an abrasive suspension jet is formed by propelling a premixed abrasive suspension through a nozzle, has a greater capacity for drilling and cutting than the conventional abrasive water jet system. In the present investigation, an apparatus of the premixed abrasive water jet system was constructed for experimental purposes, and the erosion characteristics under submerged conditions were studied. The maximum jetting pressure was 20 MPa. The pressure in the test cell was varied up to 1 MPa. The erosion tests with the cavitating water jet and the submerged abrasive jet were conducted. It is found that the mass loss and the erosion pit depth when using the submerged abrasive jet decrease with increasing stand-off distance and pressure in the test cell. The erosion characteristics due to the submerged abrasive jet is affected greatly by the cavitation phenomenon.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.