Abstract
Abstract B4C/TiB2/Mo ceramic nozzles were obtained by uniaxial hot-pressing. The mechanical properties and erosion behaviour of B4C/TiB2/Mo ceramic nozzles were investigated. Volume erosion rate was used to rank the erosion behaviour of the B4C/TiB2/Mo ceramic nozzles. The relationship between mechanical properties and the volume erosion rate of the nozzles was discussed. X-ray diffraction analysis showed that in-situ reaction to form TiB2 happened during sintering. Scanning electron microscopy was employed to observe the fracture surfaces and eroded surfaces of B4C/TiB2/Mo ceramic nozzles. A model of erodent particles and nozzle during the erosion test was established using the JH2 model. The maximum von Mises stresses on the entry, middle and exit surfaces of the nozzle were calculated. The result showed that the hardness played a key role in influencing the erosion behaviour of B4C/TiB2/Mo ceramic nozzles. Erosion mechanisms of B4C/TiB2/Mo ceramic nozzles at the entry, middle and exit bore area were mainly brittle fracture, fracture & plowing and micro-plowing, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.