Equivalence of the notch stress intensity factor, tip opening displacement and energy release rate for a sharp V-notch

Abstract

For an infinite elastic plane with a sharp V-notch under the action of symmetrically loading at infinity, the length of crack initiation ahead of the V-notch’s tip is estimated according to a modified Griffith approach. Applying a new conservation integral to the perfectly plastic strip (Dugdale model) ahead of the V-notch’s tip, the relationship between notch stress intensity factor (NSIF) and notch tip opening displacement (NTOD) is presented. Also, the relationship between NSIF and perfectly plastic strip size (PPSS) is found. Since there are three fracture parameters (NSIF, NTOD, and PPSS) with changeable notch opening angle in two basic relationships, it is necessary to select one critical parameter with changeable notch opening angle or two independent critical parameters, respectively. With the help of a characteristic length, it is found by this new conservation integral that the NSIF, NTOD and energy release rate are equivalent in the case of small-scale yielding. Especially, the characteristic length possesses clear physical meaning and, for example, depends on both the critical NSIF and SIF or both the NTOD and CTOD, respectively, in which SIF and CTOD are from the tip of a crack degenerated from the sharp V-notch. The dependence of NSIF on NTOD and PPSS is presented according to the equivalence, and the critical NSIF depending on the critical NTOD with a notch opening angle is also predicted.