Abstract
In this study an industrial algal waste from agar extraction has been used as an inexpensive and effective biosorbent for cadmium (II) removal from aqueous solutions. This biosorbent was compared with the algae Gelidium itself, which is the raw material for agar extraction. Equilibrium data follow both Langmuir and Redlich–Peterson models. The parameters of Langmuir equilibrium model are q max = 1 8.0 mg g - 1 , b = 0.1 9 mg l - 1 and q max = 9.7 mg g - 1 , b = 0.1 6 mg l - 1 , respectively for Gelidium and the algal waste. Kinetic experiments were conducted at initial Cd(II) concentrations in the range 6–91 mg l −1. Data were fitted to pseudo-first- and second-order Lagergren models. For an initial Cd(II) concentration of 91 mg l −1 the parameters of the pseudo-first-order Lagergren model are k 1 , ads = 0.1 7 and 0.87 min −1; q eq = 1 6.3 and 8.7 mg g −1, respectively, for Gelidium and algal waste. Kinetic constants vary with the initial metal concentration. The adsorptive behaviour of biosorbent particles was modelled using a batch reactor mass transfer kinetic model. The model successfully predicts Cd(II) concentration profiles and provides significant insights on the biosorbents performance. The homogeneous diffusivity, D h, is in the range 0.5–2.2×10 −8 and 2.1–10.4×10 −8 cm 2 s −1, respectively, for Gelidium and algal waste.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
