Year-end Sale % OFF 
Abstract
Microwave absorbing composites with epoxy-silicone as matrix and both multi-walled carbon nanotubes (MWCNTs) and carbonyl iron (CI) particles as absorbers were prepared, and their electromagnetic and microwave absorbing properties were investigated in the frequency range of 2–18 GHz. The microstructures of the composites show a uniform dispersion of the MWCNTs and CI particles in the matrix. The complex permittivity of the composites increased with increasing MWCNT content. A double resonance behavior of the complex permeability has been observed. One is due to the domain wall motion at about 7.5 GHz and the other is due to spin rotation at about 13.5 GHz. Reflection loss values exceeding −5 dB can be obtained in the frequency range of 10.4–18, 4.4–18 and 2–18 GHz, when the composite thickness is 0.5, 1 and 1.5 mm, respectively. A minimum reflection loss of −16.9 dB at 10.5 GHz and a bandwidth over the frequency range of 3.4–18 GHz with reflection loss below −10 dB can obtained for a composite filled with 0.5 vol% MWCNT and 50 vol% CI particles.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
