Epoxy‐based composite adhesives: Effect of hybrid fillers on thermal conductivity, rheology, and lap shear strength

Abstract

Thermal management is an important parameter in an electronic packaging application. In this work, three different types of fillers such as natural graphite powder (Gr) of 50‐μm particle size, boron nitride powder (h‐BN) of 1‐μm size, and silver flakes (Ag) of 10‐μm particle size were used for thermal conductivity enhancement of neat epoxy resin. The thermal properties, rheology, and lap shear strength of the neat epoxy and its composite were investigated. The analysis showed that the loading of different wt% of Gr‐based fillers can effectively increase the thermal conductivity of the epoxy resin. It has also been observed that the thermal conductivity of the hybrid filler (Gr/h‐BN/Ag) reinforced epoxy adhesive composite increased six times greater than that of neat epoxy resin composite. Further, the viscosity of hybrid filler reinforced epoxy resin was found to be increased as compared with its virgin counterpart. The adhesive composite with optimized filler content was then subsequently subjected to determine single lap shear strength. The degree of filler dispersion and alignment in the matrix were determined by scanning electron microscopy (SEM) analysis.