Abstract

There is an increasing demand for robust, affordable, and sensitive analytical devices for clinical diagnostics. Herein, we describe a simple route to produce biodegradable and disposable thermoplastic composite electrodes using the commercial polymer (Ecoflex®) and graphite microparticles. The surface of the carbon composite electrode was modified with gold nanoparticles conjugated with graphene quantum dots (Au@GQDs) for sensitive and non-enzymatic glucose sensing. The morphological and structural characterizations of the modified electrochemical device revealed a hydrophilic rough composite surface, with high dispersion of graphite in the polymer matrix and confirmed the successful superficial modification of the working electrode with spherical Au@GQDs nanoparticles. Cyclic voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS) were used to electrochemically characterize the modified and nonmodified thermoplastic sensor, demonstrating a 4.5-fold enhancement of the electroactive area, higher heterogeneous electron transfer kinetics, and electrocatalytic properties for glucose sensing when the sensor was modified with Au@GQDs. The electrochemical determination of the glucose was carried out using an amperometric method applying -0.15 V in alkaline conditions (0.1 mol L−1 NaOH). Under optimized conditions, the proposed method presented a high sensitivity (4.85 A L mol−1) and a low limit of detection (LOD) of 9.12 µmol L−1. The Ecoflex:graphite/Au@GQDs sensor was applied for glucose sensing in synthetic saliva samples with recovery values ranging from 97.84% to 105.20%, highlighting the excellent accuracy of the proposed method. Finally, the electrode was subjected to thermal and biological degradation studies and presented disposable and eco-friendly characteristics. Based on these results, we believe that this new thermoplastic composite sensor modified with Au@GQDs can be an excellent candidate for a disposable, low-cost, and enzymeless electrochemical glucose sensor.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call