Abstract

We report on an electrochemical measurement setup comprising a glucose sensor and a CMOS potentiostat with a two-layer membrane as the first steps toward the development of an integrated in-situ sensor system for bioreactors. The potentiostat has a chip size of 2.1 mm × 2.5 mm and a linear current range from -220 nA to 240 nA with a linearity of R 2 = 0.9995. For wide range measurements of glucose concentrations in cell culture media, electrodes functionalized with the enzyme glucose oxidase were spin-coated with membranes made from polydimethylsiloxane (PDMS). A two-stage curing scheme of the PDMS was applied, and different membrane thicknesses and curing times were evaluated. With these membranes, glucose concentrations up to 500 mM were measured with a linear measurement range up to 200 mM. The sensors were successfully employed in the glucose monitoring of a culture of Saccharomyces cerevisiae to monitor the glucose consumption of the cells. For interference elimination, the cellulose acetate membranes were employed.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.