Abstract
AbstractThis work deals with the enzymatic hydrolysis of babassu oil by immobilized lipase in a membrane bioreactor using unmixed aqueous and lipid streams. The experimental work was carried out in a flat plate membrane module with two different membranes: hydrophobic (nylon) and hydrophilic [mixed cellulose esters (MCE)], with different nominal pore sizes ranging from 0.10 to 0.65 μm. Candida cylindracea lipase was adsorbed on the membrane surface area, and the reactor was operated in batch mode. The initial enzymatic rate increased from 80 to 150 μmol H+/min when the organic phase velocity increased from 1.0×10−3 to 3.0×10−3 m/s, indicating that mass transfer in that phase was the process‐limiting step. Calcium ions had a marked effect on immobilized lipase activity, increasing around twofold the lipolytic activity. Long‐term experimental runs showed that the immobilized lipase remained stable for at least 8 d. The values for immobilized protein and maximal productivities observed for 0.45 μm membranes were: 1.01 g/m2 and 193 μmol H+/m2·s for MCE membrane and 0.78 g/m2 and 220 μmol H+/m2·s for nylon membrane. The productivities obtained are among the highest values reported in the technical literature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.