Environmentally Friendly Synthesis of Polymer-Grafted Nanoparticles

Abstract

Inorganic nanoparticles such as silica, and titanium oxide, are widely used industrially as fillers and pigments for polymer materials, because inorganic nanoparticles have excellent properties such as chemical, heat and weather resistance, lightweight, thermal conductivity and low thermal expansion. On the other hand, nanocarbons, such as carbon black, nanodiamond, and carbon nanotube, are well known as one of the industrially important carbon materials. Carbon materials also have outstanding properties such as electro-conductivity, heat-resistance, biocompatibility, and chemical-resistance. Carbon nanotubes in particular have attracted attention as nanotechnology related materials. In general, dispersing inorganic nanoparticle and nanocarbons uniformly into a polymer or an organic solvent is very difficult because of aggregation. In addition, the mechanical properties of polymer composite from nanoparticles and nanocarbons are considered to depend on not only the mechanical properties of the polymer matrix but also on the properties of interfacial regions between surface of nanoparticles and matrix polymers. The chemical and physical modifications of inorganic nanoparticle and nanocarbon surfaces, therefore, have been extensively studied. The chemical modification of surfaces is permanent, but physical modification is temporary. We have pointed out that the dispersibility of silica nanoparticles and nanocarbons is extremely improved by surface grafting of polymers, namely, chemical binding of polymers, onto nanoparticle and nanocarbon surfaces (Tsubokawa, 1999; Tsubokawa, 2002; Tsubokawa, 2007). In addition grafting of polymers onto these surfaces interests us for designing new functional composite materials which have the excellent properties both of nanoparticles as mentioned above and of grafted polymers, such as photosensitivity, biorepellent activity, antibacterial activity, and pharmacological activity (Tsubokawa, 2007). We have succeeded in the grafting of various polymers such as vinyl polymer (Tsubokawa et al., 1988a; Tsubokawa et al., 1990; Fujiki et al., 1990; Tsubokawa et al., 1992a), polyester (Tsubokawa et al., 1982; Tsubokawa et al., 1983), polyether (Tsubokawa et al., 1986; Tsubokawa et al., 1988b), poly(organophosphazene) (Tsubokawa et al., 1992b), and poly(dimethysiloxane) (Tsubokawa et al., 1992c) onto silica nanoparticle and carbon black surfaces using surface functional groups as grafting sites. Furthermore, many experimental attempts by other researchers also have been made to graft polymers onto silica nanoparticle and carbon black surfaces.