Abstract
Green synthesis, based on green chemistry, is replacing the traditional methods, aiming to contribute with an enhanced environmental sustainability, which can be achieved using nontoxic compounds from biological resources, such as natural extracts from plants. In this study, the life cycle assessment (LCA) of iron oxide nanoparticles prepared through the green synthesis and the coprecipitation method is reported by following a cradle-to-gate approach. The LCA allowed quantifying and normalized the environmental impacts produced by the green synthesis (1.0 × 10–9), which used a Cymbopogon citratus (C. citratus) extract and sodium carbonate (Na2CO3). The impacts were also determined for the coprecipitation method (1.4 × 10–8) using the iron(II) salt precursor and sodium hydroxide (NaOH). The contribution of C. citratus extract and Na2CO3 as the precursor and pH-stabilizing agents, respectively, was compared regarding the iron(II) and NaOH compounds. Environmental sustainability was evaluated in human toxicity, ecosystem quality, and resource depletion. The major environmental contribution was found in the marine aquatic ecotoxicity (7.6 × 10–10 and 1.22 × 10–8 for green synthesis and the coprecipitation method) due to the highest values for ethanol (3.5 × 10–10) and electricity (1.4 × 10–8) usage since fossil fuels and wastewater are involved in their production. The C. citratus extract (2.5 × 10–12) presented a better environmental performance, whereas Na2CO3 (4.3 × 10–11) showed a slight increase contribution compared to NaOH (4.1 × 10–11). This is related to their fabrication, involving toxic compounds, land occupation, and excessive water usage. In general, the total environmental impacts are lower for the green synthesis, suggesting the implementation of environmentally friendlier compounds based on natural sources for the production of nanomaterials.
Highlights
Nanomaterials have gained significant attention in fields such as medicine[1] and environmental remediation,[2] outstanding the application of iron oxide nanoparticles (IONPs)
This study reports the life cycle assessment (LCA) of the green synthesis of functional IONPs, aiming to quantify the environmental impacts using more environmentally friendly compounds
The marine aquatic ecotoxicity (MAE) exhibited the highest contribution with values up to 8.9 × 104 and 1.4 × 106 kg 1,4-DB equiv for the green synthesis and the coprecipitation method, respectively
Summary
Nanomaterials have gained significant attention in fields such as medicine[1] and environmental remediation,[2] outstanding the application of iron oxide nanoparticles (IONPs). The potential environmental impacts of nanomaterials, especially, iron-based nanoparticles, have to be considered and evaluated, which can affect different organisms and microorganisms in a large variety of ecosystems.[10]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
