Environmental Remediation of Contaminated Wastewater with Ammonium Using Clay-Based Adsorbents

Abstract

Due to a lack of water treatment technology, developing and emerging nations have become significant polluters and water shortage is exacerbated by pollution. Ammonium toxicity is a huge global environmental concern with no clear solution. Population growth and industrialization destroy the ecosystem. Common and industrial products contain ammonium ions. Water pollution damages fish and other aquatic life. An inexpensive and green wastewater treatment method is adsorption. Adsorbent polymers that remove ammonium ions from wastewater have been explored. Ammonium ions are very hazardous when deposited into surface waters. Surfaces of bentonite and montmorillonite clay may attach sodium ammonium ions. They are cheap and abundant, therefore used to treat drain water. Bentonite outperformed montmorillonite in eliminating ammonium ions from water. Bentonite and montmorillonite clays were used to remove residual ammonium ions. These are utilized for bentonitic and montmorillonitic clays. Both clays were absorbed in a neutral pH, and it was free of sulfuric acid, ammonium ions, and phosphorus ions. Montmorillonitic clay boosted TDS by nearly 10% whereas bentonitic clay only raised TDS by 1%. Adsorption may inexpensively filter water and the surface charge of adsorbents affect their adsorption capacity. Ammonium ions may be recycled, and several bioreactors can remove ammonium ions from liquid and solid phases. Iterate over several models and the Freundlich isotherm model outperforms the Langmuir model by 5%. And bentonite clay adsorbs better due to iron oxide content.