Abstract
Vinyl chloride monomer (VCM) is classified as group 1 carcinogenic to humans by the International Agency for Research for Cancer (IARC). In 2012, USEPA promulgated a new VCM emission standard as part of National Emission Standards for Hazardous Air Pollutants (NESHAP) for polyvinyl chloride (PVC) and copolymer plants. The standard was set by benchmarking of peer plants with maximum achievable control technology (MACT). This study performs an emission assessment of a world-class PVC plant in Taiwan according to the MACT analysis. The emission data obtained were then benchmarked with baseline emission estimates of 15 PVC plants in the USA. Results of this study show seven types of VCM emissions: stripped resin of suspension/dispersion, wastewater, process vent, heat-exchange system, storage tank, equipment leaks, and other sources (gasholder). All the emission factors are complied with their MACT emission limitations (MEL) and ranked either #1 or #2 among the 15 plants. They are also summed and benchmarked against the production capacity of each plant, showing a negative power function with a fair correlation (R2 = 0.73). Among seven types of emissions, stripped resin contributes the highest (51.7%) by average emission factor of the 15 plants plus this study plant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
