Environmental life cycle assessment of a commercial office building in Thailand

Abstract

To minimize the environmental impacts of construction and simultaneously move closer to sustainable development in the society, the life cycle assessment of buildings is essential. This article provides an environmental life cycle assessment (LCA) of a typical commercial office building in Thailand. Almost all commercial office buildings in Thailand follow a similar structural, envelope pattern as well as usage patterns. Likewise, almost every office building in Thailand operates on electricity, which is obtained from the national grid which limits variability. Therefore, the results of the single case study building are representative of commercial office buildings in Thailand. Target audiences are architects, building construction managers and environmental policy makers who are interested in the environmental impact of buildings. In this work, a combination of input–output and process analysis was used in assessing the potential environmental impact associated with the system under study according to the ISO14040 methodology. The study covered the whole life cycle including material production, construction, occupation, maintenance, demolition, and disposal. The inventory data was simulated in an LCA model and the environmental impacts for each stage computed. Three environmental impact categories considered relevant to the Thailand context were evaluated, namely, global warming potential, acidification potential, and photo-oxidant formation potential. A 50-year service time was assumed for the building. The results obtained showed that steel and concrete are the most significant materials both in terms of quantities used, and also for their associated environmental impacts at the manufacturing stage. They accounted for 24% and 47% of the global warming potential, respectively. In addition, of the total photo-oxidant formation potential, they accounted for approximately 41% and 30%; and, of the total acidification potential, 37% and 42%, respectively. Analysis also revealed that the life cycle environmental impacts of commercial buildings are dominated by the operation stage, which accounted for approximately 52% of the total global warming potential, about 66% of the total acidification potential, and about 71% of the total photo-oxidant formation potential, respectively. The results indicate that the principal contributor to the impact categories during the operation phase were emissions related to fossil fuel combustion, particularly for electricity production. The life cycle environmental impacts of commercial buildings are dominated by the operation stage, especially electricity consumption. Significant reductions in the environmental impacts of buildings at this stage can be achieved through reducing their operating energy. The results obtained show that increasing the indoor set-point temperature of the building by 2°C, as well as the practice of load shedding, reduces the environmental burdens of buildings at the operation stage. On a national scale, the implementation of these simple no-cost energy conservation measures have the potential to achieve estimated reductions of 10.2% global warming potential, 5.3% acidification potential, and 0.21% photo-oxidant formation potential per year, respectively, in emissions from the power generation sector. Overall, the measures could reduce approximately 4% per year from the projected global warming potential of 211.51 Tg for the economy of Thailand. Operation phase has the highest energy and environmental impacts, followed by the manufacturing phase. At the operation phase, significant reductions in the energy consumption and environmental impacts can be achieved through the implementation of simple no-cost energy conservation as well as energy efficiency strategies. No-cost energy conservation policies, which minimize energy consumption in commercial buildings, should be encouraged in combination with already existing energy efficiency measures of the government. In the long run, the environmental impacts of buildings will need to be addressed. Incorporation of environmental life cycle assessment into the current building code is proposed. It is difficult to conduct a full and rigorous life cycle assessment of an office building. A building consists of many materials and components. This study made an effort to access reliable data on all the life cycle stages considered. Nevertheless, there were a number of assumptions made in the study due to the unavailability of adequate data. In order for life cycle modeling to fulfill its potential, there is a need for detailed data on specific building systems and components in Thailand. This will enable designers to construct and customize LCAs during the design phase to enable the evaluation of performance and material tradeoffs across life cycles without the excessive burden of compiling an inventory. Further studies with more detailed, reliable, and Thailand-specific inventories for building materials are recommended.