Abstract
Recycling is the inclusion of wastes that can be recycled into the production process by transforming them into secondary raw materials after various physical and/or chemical processes. The natural resources are not infinite. Of course it will run out one day. For this reason, the recycling process has gained a serious dimension for countries due to both economic and environmental factors. Although the recycling process of thermoplastic materials is known and frequently used by the science and industry community, the recycling of rubber materials has remained in the background. However, with the increase in the number of automobiles around the world, the increasing amount of solid waste tires puts the society in trouble both economically and environmentally. In this research, there are data on the introduction of automobile tires, which are a very serious waste throughout the country, to the economy.
Highlights
The many countries and manufacturers have sought and developed various methods for recycling and reusing waste in order to prevent waste of resources and to cope with the energy crises that may arise
The cost of countries spent on imported scrap materials will be eliminated and a significant contribution will be made to the national economy
Pyrolysis is a costly process in which valuable components used in the recycling of waste tires are recovered (Table 2) [23,24]
Summary
The many countries and manufacturers have sought and developed various methods for recycling and reusing waste in order to prevent waste of resources and to cope with the energy crises that may arise. Developing countries and developed countries need to stop wasting waste in order to make maximum use of their natural resources in the long term [1,2,3,4] They need to include economic value materials in the recycling process. Used or end-of-life automobile tires have reached a significant amount in the waste industry These waste materials pose an environmental hazard. The difficulty of recycling of automobile tires in the thermoset material class is the combination of natural rubber with cross-links by the vulcanization process. These cross-links give the material a new.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have