Environmental impact assessment of post-combustion CO2 capture technologies applied to cement production plants

Abstract

Decarbonizing the cement manufacturing sector presents an interesting and pressing challenge as it is one of the largest energy consumers in industry (i.e., 7%), emitting considerable amounts of anthropogenic carbon dioxide (i.e., 7%). This paper performs a technical and environmental assessment of decarbonisation of cement production through process modelling and simulation, thermal integration analysis, and Life Cycle Assessment (LCA). Integration of three post-combustion capture methods for a conventional cement plant with an annual productivity of one million tons and a carbon capture rate of 90% is evaluated in comparison to the reference case without carbon capture and storage (CCS). Mass and energy balances derived from simulations are used for the assessment of three innovative capture systems: reactive gas-liquid absorption using Methyl-Di-Ethanol-Amine, reactive gas-solid adsorption using calcium looping (CaL) technology and membrane separation. For the LCA study, a “cradle-to-gate” approach is carried out using GaBi software, according to the ReCiPe impact assessment method. The general conclusion is that integrating the CCS methods into the cement production process leads to a decrease in global warming potential (GWP) in the range of 69.91%–76.74%. Of the CCS technologies analysed, CaL technically outperforms the others as it requires 34% less coal and provides 1.6 times higher gross energy efficiency. From an environmental perspective, CaL integration ranks first, with the lowest scores in six of the nine impact categories and a GWP reduction of 76.74% compared to the baseline scenario without CCS.