Abstract
ABSTRACTWaste cooking oil was selected as the source material for the development of an alternative fuel. The conversion of waste cooking palm oil (WCO) into waste cooking palm oil methyl ester (WCOME) was carried out through a transesterification process. The chemical components and composition of the prepared neat methyl ester was investigated using Fourier Transform Infrared spectroscopy (FTIR) and Gas Chromatography Mass Spectrometry (GC-MS) analyses. Physio-chemical properties were determined based on ASTM standards. A thermal barrier coating was applied to the engine combustion chamber using an air plasma spray technique to reduce exhaust emission. A Kirloskar TV1 model single-cylinder direct injection diesel engine with high precision eddy current dynamometer was used for experimentation. Low brake thermal efficiency and high brake specific fuel consumption was observed for 20WCOME in the coated engine. Low CO, HC and smoke emissions were observed for 10WCOME and 20WCOME with an increase in NOx emission.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
