Environmental assessment of alkali-activated materials based on agro-industrial waste as alkaline activators through leaching tests

Abstract

Global circular economy drives the development of sustainable alkali activated materials (AAM) for use as construction material from industrial by-products and wastes. The assessment of the potentially hazardous substances release of these new material combinations into the soil and groundwater over time is essential. In this study, the aim is the environmental assessment of three AAMs based on blast furnace slag (BFS), activated with almond shell biomass ash (ABA) as potassium source and three solid sources of silica from the agricultural industry, rice husk ash (RHA), spent diatomaceous earth (SDE) and bamboo leaf ash (BLA), using European horizontal leaching tests proposed for construction materials, for monolithic form, Dynamic Surface Leaching Test (DSLT) and for granular form, Up-flow Percolation Test and the Compliance leaching test, by simulating different scenarios of their entire life cycle. The leaching results of the AAM showed the effectiveness of the inertization of all the recycled materials studied, which exceeded some inert materials limits, by means of the activation process. Despite the absence of significant differences in the leaching mechanisms of the oxyanions As, Cr, Mo, Sb, Se and V between the three AAMs developed, they presented different long-term leaching behavior depending on their form, monolithic, or granular, and therefore in their different life cycle stages. Therefore, it is concluded that although the incorporation of agro-industrial waste as alternative activators in BFS based AAM according to the Dutch Soil Quality Decree (for unrestricted use of monolithic and granular materials) is an environmentally acceptable option, the design of waste derived AAMs should be assessed by means of a combination of leaching tests that cover their expected life cycle.