Abstract
The volumetric entropy generation rate distributions and exergy losses of premixed methane/air with hydrogen addition in a micro-planar combustor were numerically investigated. Detailed reaction mechanism for methane/hydrogen/air was considered. The analysis identified reactions contributing most of the entropy generated in combustion. The entropy generation rates due to the effects of chemical reaction, thermal conduction and mass diffusion are calculated based on the gas properties. A detailed parametric study of the influence of flow velocity and hydrogen mass fraction on the volumetric entropy generation rate is performed. With the increase of H2 addition to methane fuel, the entropy generation rates induced by thermal conduction and mass diffusion decrease, however, the chemical reaction induced entropy generation rate is less sensitive to H2 addition. The total entropy generation rate rises with the inlet velocity. The availability reduction by wall heat losses increases with increasing H2 addition and inlet velocity. The exergy efficiency remains nearly constant with H2 addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
