Abstract

Tritium levels in the groundwater of arid regions are very low; in most cases, these low tritium levels cannot be detected using a conventional liquid scintillation counter (LSC). To measure the tritium activity concentration, low-level tritium in groundwater needs to be enriched by a known factor so that the scintillation counter can detect it. An electrolysis process with electrolytic cells was designed and fabricated in our laboratory following the International Atomic Energy Agency (IAEA) instructions. Nine spiked samples with a known quantity of tritium were enriched, and the tritium activity concentration was measured using the scintillation counter. The enriched water exhibits a comparable level of spiked samples, albeit with some degree of uncertainty. A correlation was drawn among the tritium activity, enrichment factor, and the required time for the electrolysis procedure. This study confirmed that an enrichment process of approximately ten- to fortyfold of the initial concentration of the tritium could be achieved using the electrolysis process with the fabricated electrolytic cells. The simple design and fabrication of the electrolysis process by controlling various parameters make it affordable to measure low-level tritium using a conventional LSC. Various statistical analyses confirmed the accuracy and precision of the data obtained by the electrolysis process. This enrichment technique would prove valuable in regions where tritium levels in groundwater are extremely low, making them challenging to detect using conventional liquid scintillation counter.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call