Abstract
This study, focused on the beneficiation of a Nigerian complex chromite ore sourced from Tunga-Kaduka, Anka Local Government of Zamfara State, Nigeria, assaying 45.85% Cr2O4 and 54.15% mineral impurities, was enriched concurrently through sink floatation and magnetic separation techniques. The chromite ore initially analyzed to contain silicate impurities was found not suitable for metallurgical purposes. Thus, enrichment was examined through gravity separation studies using organic liquid with different specific gravities at 2.8, 3.3, and 4.0. The separation of chromite ore with lowest particle size fraction was done using Mozley mineral separator followed by the magnetic separation of the sink product by magnetic separator. The results obtained revealed about 77% of the total material containing 300 μm particle size, 52% ˂ 212 μm and 17% below 75 μm. Subsequent analysis of the beneficiated ore was carried out by wet chemical analysis and atomic absorption spectrophotometer. The results showed that Cr2O4 content increased to 78.34% from initial 45.83% with maximum Cr:Fe ratio of 3.2:1, representing 84.27% of chromium metal present in the ore. The enrichment of Cr2O4 obtained in this study could be found metallurgically applicable in the electro-deposition and ferro-chromium alloy production practices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
