Abstract
Wind energy has been regarded as one of the renewable energy sources to rely on in the future. In this aspect, wind turbine blade maintenance is quite a challenge in tropical areas like India. One of the main reasons why wind turbine blades get damaged and produce less energy is solid particle erosion. In the present work, nanocomposite epoxy (EP) coatings reinforced with Al2O3, ZrO2, and CeO2 nanoparticle fillers have been applied on glass fiber reinforced polymer (GFRP) substrates using a simple spray coating method. These nanoparticles have been prepared in-house by solution combustion synthesis (SCS) route using urea, glycine, and oxalyl dihydrazide fuels. X-ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy have been used to characterize the materials and coatings. EP coatings with different Al2O3, ZrO2, and CeO2 nanoparticle concentrations have been subjected to solid particle erosion resistance tests at impinging angles of 30°, 60° and 90°. ZrO2 and CeO2 nanoparticle-reinforced EP coatings show better resistance to solid particle erosion than Al2O3-reinforced coatings. Estimated average erosion rates are 17 and 11.3 × 10−3 mm3 g−1, respectively, for epoxy coatings with 20 and 40 wt% ZrO2 nanoparticles. However, GFRP substrate and neat EP coating show much higher erosion rates with respect to nanoparticles-reinforced EP coatings. To ascertain a correlation between H3/E2 and the solid particle erosion rates of the coatings, nanoindentation tests have been carried out. Tensile strength and initial modulus of all the coatings are found to be directly proportional to the average erosion rates, whereas, elongation at break shows an inverse relationship with the average erosion rate. This correlation of mechanical properties with solid particle erosion performance can play a critical role in the development of realistic simulation of protective coatings for wind turbine blades.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.