Abstract
CrN is one of the most important transition metal nitrides, used as protective and anti-wear coating in modern engineering applications. However, CrN coatings are typically brittle and susceptible to catastrophic failure. In this paper, CrNiN coatings with differing Ni contents were deposited on tool steel substrates using a closed field unbalanced magnetron sputtering system. The effects of Ni addition on the microstructure and mechanical characteristics of CrN thin films were studied by combining nanoindentation tests with cross-sectional transmission electron microscopy. A columnar structure was observed in the CrN coating. With an increase in Ni content, the resultant columnar grains exhibited a high aspect ratio. Ni additions to CrN were found to enhance its damage resistance. Notably, the CrN thin film deformed mainly by intercolumnar shear sliding, whereas plastic deformation was favored in the CrNiN thin films exhibiting high aspect ratio columnar grains. More significantly, this change of microstructure with enhanced Ni content led to improved damage tolerance, manifested by a higher load required for crack formation upon a sharp contact (expressed as 1/HE2), and the plastic energy absorbed during nanoindentation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
