Abstract
Pure grade samples from operational wash oil (used in cracked gas compression unit), light cycle oil, heavy residue and heavy diesel oil were obtained. Miscible blend samples of ratio 1:1 were also obtained from wash oil/light cycle oil and wash oil/heavy residue. These samples were subjected to characterization and the following quality parameters were measured, namely: aromatic content, specific gravity, gum content and distillation range. The results obtained from Tables 2 and 3 for wash oil/heavy residue blend, sample E, showed 44.10, 0.951, 6.72 and 184.2oC – 223.2oC as aromatic content, specific gravity, gum content and distillation range respectively. These quality parameters were seemingly consistent with the standard for wash oil (Table 3). Enhanced antifouling and dispersing action were observed to be adequate in the wash oil / heavy residue blend, sample E probably due to its high aromatic content. Heavy residue, sample C was therefore seen as most suitable blending solvent for the operational wash oil, sample A. KEY WORDS: Gas Compression, Polymeric Fouling, Antifoulant, Quality Parameters and wash oil. Global Journal of Pure and Applied Sciences Vol.11(1) 2005: 99-105
Highlights
Summary
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
