Abstract
The importance of ZT in thermoelectric (TE) materials is critical for green power generation and cooling applications. Therefore, tremendous efforts were underway to improve ZT, in which we proposed a layer structured approach by successively arranging of coarse Bi0.5Sb1.5Te3 (BST) and fine BST/0.07Cu microstructure materials and investigated their transportation mechanism. The dual bulk microstructure was well-bonded and confirmed by analyzing the microstructure through scanning electron microscope (SEM), electron backscatter diffraction analysis (EBSD) and simulated the electrical potential and temperature distribution during spark plasma sintering with COMSOL software. The results indicate that the highest power factor of 3.8 mW/m-K2 was attained in the layer structured sample, which is significantly higher than other samples due to its synergistically optimized electrical conductivity and Seebeck coefficient. Through the varied microstructure, the κ was decreased at 400 K and consequently the ZT was improved to 1.25 at 400 K for the layer structure samples. Therefore, it is suggested that layered arrangement of different microstructure material could improve the thermoelectric properties of materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
