Enhancing the strength-ductility synergy in hot-forged Fe50Mn30Co10Cr10 high entropy alloy (HEA) through carbon additions

Abstract

In this work, we systematically investigated the effect of carbon additions on the microstructure and room temperature mechanical properties of hot-forged Fe50Mn30Co10Cr10 HEA. The different carbon contents were introduced to Fe50-xMn30Co10Cr10Cx (x = 1, 2.5, 6 at.%, hereinafter, referred as C1, C2.5 and C6, respectively) HEAs to enhance the strength-ductility synergy by triggering the multiple strengthening mechanisms. The results showed that the grain sizes were decreased with increasing of carbon content, while a high fraction of mechanical twins ∼45% were generated in C2.5 HEA, and their fractions were ∼35% in C1 and C6 HEAs. Moreover, the discrete nano-sized M23C6 carbides in C2.5 HEA were transformed into continuous mico-sized M23C6 carbides along the grain boundaries in C6 HEA. Therefore, C2.5 HEA possessed high yield strength of 584 MPa, tensile strength of 1.03 GPa and outstanding ductility of 68%, i-e., breaking the strength-ductility paradox. A highest yield strength of∼662 MPa and tensile strength of more than 1 GPa were observed for C6HEA with refine grains, although the ductility was only ∼10%, which indicated that the massive carbon addition could effectively enhanced the strength of HEA but at the cost of ductility due to the presence of coarse M23C6 carbide precipitation. The enhanced mechanical properties of studied HEAs are mainly ascribed to the contribution of multiple strengthening mechanisms including precipitation, grain boundary, dislocation and interstitial solid solution strengthening.