Enhancing the photostability and mechanical properties of poly‐lactic acid (PLA) composites with glutaric acid functionalized titanium dioxide (TiO2)

Abstract

AbstractThe performance of Poly(lactic acid) (PLA) composites reinforced with functionalized titanium dioxide (TiO2) nanoparticles in rutile and anatase crystalline phases were systematically investigated. The results underline that the incorporation of TiO2, regardless of its crystalline structure, significantly enhances PLA's crystallinity by 85%. Notably, rutile TiO2, when functionalized with higher glutaric acid concentrations, was an effective crystallinity booster by 95%, passing from 20.39% to 39.58% crystallinity for the PLA/TiO2 R20 + 10% system. Furthermore, this research elucidates that the selection between anatase and rutile phases plays a vital role in the photostabilization. Functionalized Rutile TiO2 exhibited exceptional UV resistance, effectively inhibiting photodegradation; for example, after 15 days of exposure, the functionalized systems exhibited a 497.6% improvement for PLA/TiO2 R10 + 5% (22.1 ± 2.5 MPa), while the PLA/TiO2 R10 + 5% showed an 85.1% increase in composite stiffness (35.5 ± 3.5 MPa) after 7 days of degradation, in comparison with pristine PLA (19.2 ± 2.9 MPa). Anatase, conversely, displayed varying effects depending on concentration, acting as a stabilizer at lower levels and a promoter of degradation at higher concentrations. This knowledge enables the precise modifying of PLA composites for specific applications, balancing crystallinity, mechanical properties, and UV resistance for a diverse array of applications.Highlights TiO2 enhances photostability in PLA confirming its potential as a UV stabilizer. Comparing anatase and rutile phase: Unveiling PLA composite dynamics. Glutaric acid on TiO2 enhances PLA composite strength significantly. Optimal acid concentration key to composite performance. Tailored PLA composites balance crystallinity, mechanics, and UV resistance.