Abstract
An efficiently designed thermal energy storage (TES) tank is critical for enhancing the efficiency of solar water heating systems (SWHSs). This study describes the development of a hybrid sensible-latent TES tank in which a double-layer phase change material (PCM) with different melting points is integrated. To study its performance, a mathematical model of the SWHS with the hybrid tank was established in TRNSYS software. The results showed that when the volume of tank per unit area of solar collectors was in the range of 33.3–66.7 L/m2, the heat collection of the hybrid tank increased by 7.0%–15.6% and the heat supply increased by 7.6%–16.9% compared to that of the tank without the PCM. However, the effect of adding the PCM to the tank diminished when the volume of the tank was increased. The hybrid tank with the double-layer PCM achieved a twofold benefit of extending the heat supply time and maintaining a relatively high supply temperature compared to the tank with only a single-layer PCM. The effect of the hybrid tank on the thermal performance of the SWHS was prominent for the full-day and nighttime heating modes but was not significantly observed for the daytime heating mode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.