Abstract
In this study, varying volume percentage of titanium diboride particulates were successfully incorporated into Sn-Ag-Cu solder, to synthesize lead-free composite solders. The composite solders were synthesized via the powder metallurgy route of: blending, compaction, sintering and extrusion. The extruded materials were then characterized for their microstructural development, thermal and mechanical properties. With increasing volume percentage of titanium diboride particulates, the composite solders experienced a corresponding decrease in density values but porosity levels were observed to increase. Microstructural characterization using scanning electron microscopy revealed uniform distribution of reinforcement particulates and a fairly good interfacial integrity between the particulates and the solder matrix. Thermomechanical analysis showed that presence of titanium diboride particulates as reinforcements, decreased the average coefficient of thermal expansion of the solder composites. A change in the mechanical properties was also observed with the presence of increasing particulates. An attempt is made, to correlate the increasing presence of titanium diboride particulates with the microstructural development, as well as the mechanical and thermal properties of solder matrix.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
