Abstract

Greenhouse drying systems (GDSs) are grouped in direct-type solar dryers and are widely utilised because of their easy applicability, high product drying capacity and cost-effectiveness. In the present work, it is aimed to improve the drying performance of a GDS by using natural dolomite powder-embedded latent heat thermal energy storage unit (LHTESU) and air-to-air heat recovery system (HRS). In this context, three different types of GDSs have been designed and manufactured including a GDS with paraffin-based LHTESU, a GDS with natural dolomite powder-embedded LHTESU and a HRS-assisted GDS with natural dolomite powder-embedded LHTESU. Designed and manufactured GDSs have been experimentally analysed under the same environmental conditions. According to the experimentally achieved findings, combined utilisation of HRS and dolomite powder in the LHTESU reduced the drying time approximately as 36.36%. Moreover, highest instantaneous outlet air temperature was achieved as 51.4 °C in the system that used natural dolomite-embedded LHTESU and HRS. The exergetic efficiency of the GDS was upgraded as 46.21% by using the mentioned modifications in comparison to the base case (the system contains only paraffin-based LHTESU). In addition, specific moisture extraction rate for the analysed GDSs was attained between 0.96 and 1.52 kg.kWh−1.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.