Enhancing the Heat Storage Performance of a Na2HPO4·12H2O System via Introducing Multiwalled Carbon Nanotubes.

Abstract

The hydrated salt disodium hydrogen phosphate dodecahydrate (DHPD, Na2HPO4·12H2O) has a suitable phase transition temperature and high latent heat of phase transition. Still there are problems such as supercooling, phase separation, and low thermal conductivity. In this paper, DHPD, sodium carboxymethyl cellulose (CMC), aluminum oxide (Al2O3), and poly(vinylpyrrolidone) (PVP) are used to configure DHPD-CAP to suppress supercooling and phase separation successfully. Multiwalled carbon nanotubes (MWCNTs) are used to stabilize DHPD-CAP phase-change materials and improve the thermal conductivity of pure DHPD. Further studies show only a physical interaction between MWCNTs and DHPD, and no new phases are generated. The addition of MWCNTs can also promote the nucleation of the DHPD-CAP composite, and the corresponding latent heat of phase change shows a trend of increasing and then decreasing with the increase of MWCNT content. Compared with DHPD after one cycle, the latent heat of DHPD-CAP/MWCNT4 increases by 36.19%. With the addition of MWCNTs, the thermal stability of the composites is improved compared to pure DHPD. The DHPD-CAP/MWCNT4 composite has good stability after many cycles.