Abstract
With the advantages of high stickiness and stretchability of the hydrogel electrolyte as well as the resilient properties of film electrodes, the facile "prestrain-stick-release" strategy can be utilized for the assembly of a stretchable supercapacitor. Two major issues of concern are the relatively low mechanical strength of the hydrogel electrolyte and the low energy density of the assembled device. Herein, vinyl group grafted silica (CH2═CH-SiO2) nanoparticles were used as a nanoparticle cross-linker for polyacrylamide (PAAM), enhancing the tensile strength of 844 kPa at the strain of 3400% for the KCl-CH2═CH-SiO2/PAAM hydrogel electrolyte. Besides, carbon nanotube supported polypyrrole (CNT@PPy) and manganese dioxide (CNT@MnO2) film electrodes are prepared to assemble the stretchable asymmetric CNT@MnO2//KCl-CH2═CH-SiO2/PAAM//CNT@PPy supercapacitor, significantly enhancing the potential window to 0-2.0 V and achieving a high energy density of 40 Wh kg(-1) at the power density of 519 kW kg(-1) with the strain of 100%, which is the best known for the reported stretchable supercapacitors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.