Abstract
We report on the fabrication of organic light-emitting devices (OLEDs) using a thin NaCl interlayer as an electron-injection medium. The results show that the device containing the NaCl layer has a higher brightness and electroluminescent efficiency than the device without this layer. We also fabricated similar-structured comparable devices, which were prepared with a LiF layer as a different electron-injection medium. The maximum electroluminescent efficiency of the NaCl (1 nm)/Al cathode device was 2.85 cd/A, which is higher than the 2.25 cd/A of the LiF (1 nm)/Al cathode device. The ultrathin NaCl layer modified the carrier injection properties. In conclusion, the NaCl layer between a cathode and an emitting layer of OLEDs can be used as the carrier injection layer to improve the EL properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.