Enhancing the Electrical Conductivity and Strength of PET by Single-Wall Carbon Nanotube Film Coating.

Abstract

Single-wall carbon nanotubes (SWCNTs) with excellent physicochemical properties are considered a promising candidate for the electrical and mechanical reinforcements of polymers. However, the poor dispersion of SWCNTs in plastics seriously limits their application and their achieved performance enhancement. Here, we coat a freestanding, highly conductive SWCNT film onto the surface of a polyethylene terephthalate (PET) film by a hot-pressing method. Due to the uniform SWCNT network structure and strong interfacial interaction, the SWCNT/PET hybrid film showed notably enhanced electrical and mechanical properties even though with a very low SWCNT weight fraction of 0.066%. The surface square resistance of the SWCNT/PET film decreased to 120-140 Ω/□ from 1016 Ω. In addition, Young's modulus and tensile strength of the SWCNT/PET film reached 4.6 GPa and 148 MPa, which are 31.3 and 24.4%, respectively, higher than the pure PET film. The SWCNT/PET film shows excellent mechanical durability and thermal stability, demonstrating its potential use as an antistatic material.