Abstract

This study addresses the critical issue of traffic safety in winter, particularly focusing on the challenges posed by ice and snow on roads. Traditional methods of snow and ice removal are often labor-intensive, inefficient, and environmentally harmful. The objective is to develop a more effective solution for asphalt pavement deicing. Inspired by the anti-icing coating technology used in high-voltage conductors, this research develops an ice-suppressing material designed to reduce the adhesion between snow, ice, and pavement surfaces. The material’s performance is evaluated in terms of deicing efficiency, durability, adhesive properties, and its impact on pavement performance. Test results demonstrate that the developed ice-suppressing material significantly reduces the adhesion between the ice layer and the pavement, facilitating easier removal. This study concludes that the developed ice-suppressing material significantly enhances deicing efficiency on asphalt pavements. It exhibits strong hydrophobic properties, as evidenced by increased water droplet contact angles on coated surfaces (99.5° to 83.3°) compared to clean glass slides (39.2° to 29°). This hydrophobicity effectively reduces ice adhesion, decreasing tensile and shear strength of the ice layer by 38.2% and 63.6%, respectively. Additionally, the material demonstrates superior ice-melting capabilities in sub-zero temperatures, with coated ice cubes showing a higher mass reduction rate than uncoated ones. Importantly, its slow-release nature ensures sustained deicing performance over multiple cycles, maintaining effectiveness after seven test cycles. This study introduces an innovative ice-suppressing material that not only improves the efficiency and environmental impact of deicing methods but also contributes to enhancing road safety in winter conditions. The material’s novel composition and sustained effectiveness present a significant advancement in the field of winter road maintenance.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call