Enhancing the CO2 Adsorption of the Cobalt-Free Layered Perovskite Cathode for Solid-Oxide Electrolysis Cells Gains Excellent Stability under High Voltages via Oxygen-Defect Adjustment.

Abstract

Solid-oxide electrolysis cells are a clean energy conversion device with the ability to directly electrolyze the conversion of CO2 to CO efficiently. However, their practical applications are limited due to insufficient CO2 adsorption performance of the cathode materials. To overcome this issue, the A-site cation deficiency strategy has been applied in a layered perovskite PrBaFe1.6Ni0.4O6-δ (PBFN) cathode for direct CO2 electrolysis. The introduction of 5% deficiency at the Pr/Ba site leads to a significant increase in the concentration of oxygen vacancies (nonstoichiometric number δ of oxygen vacancies increased from 0.093 to 0.132), which greatly accelerates the CO2 adsorption performance as well as the O2- transport capacity toward the CO2 reduction reaction (CO2RR). CO2 temperature-programmed desorption indicates that A-site cation-deficient (PrBa)0.95Fe1.6Ni0.4O6-δ (PB95FN) shows a larger desorption peak area and a higher desorption temperature. PB95FN also exhibits a greater presence of carbonate in Fourier transform infrared (FT-IR) spectroscopy. The electrical conductivity relaxation test shows that the introduction of the 5% A-site deficiency effectively improves the surface oxygen exchange and diffusion kinetics of PB95FN. The current density of the electrolysis cell with the (PrBa)0.95Fe1.6Ni0.4O6-δ (PB95FN) cathode reaches 0.876 A·cm-2 under 1.5 V at 800 °C, which is 41% higher than that of PB100FN. Moreover, the PB95FN cathode demonstrates excellent long-term stability over 100 h and better short-term stability than PB100FN under high voltages, which can be ascribed to the enhanced CO2 adsorption performance. The PB95FN cathode maintains a porous structure and tightly binds to the electrolyte after stability testing. This study highlights the potential of regulating oxygen defects in layered perovskite PrBaFe1.6Ni0.4O6-δ cathode materials via incorporation of cation deficiency toward high-temperature CO2 electrolysis.