Abstract
Intermetallic TiAl alloys have found applications in the aerospace and automotive fields. Nevertheless, to satisfy the increasingly complex environmental requirements, these lightweight alloys must be improved particularly in strength and ductility. Additive manufacturing (AM) exhibits a rapid solidification rate and may strengthen intermetallic TiAl alloys. In this study, an additively manufactured (AMed) Ti-48Al-8 Nb alloy with fine formability was successfully fabricated by optimizing the power used during directed energy deposition. The preferential crystal plane for the obtained alloy is {111}γ due to its lowest surface energy, and the presence of the thermal gradient during the AM process results in the alloy growing along the building direction. The TiAl alloy AMed at 500 W delivers an excellent tensile strength of 880 MPa that is 1.71 times higher than that of its as-cast counterpart, as well as elongation of 0.7% at room temperature. The superior properties of this alloy are due to the formation of numerous deformation twins during tensile deformation at room temperature that enables twin intersections to produce high-density nano-twins while contributing to stress release. Moreover, the AMed TiAl alloy exhibits outstanding high-temperature strength retention performance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
