Enhancing power quality of high‐speed railway traction converters by fully integrated T‐LCL filter

Abstract

AbstractModulating the traction converters produces current harmonics at the switching frequencies and their multiples. These harmonics should be minimized to meet the network specifications. The LC‐trapped filters, tuned to these frequencies, can easily meet this requirement, but the existing applicable trap filters have not been studied with the traditional traction system topologies. Thus, this paper presents a trapped LCL filter with an LC resonator on the converter side, called a fully integrated T‐LCL filter, for the traction power supply system. The model and analysis reported in this research demonstrate that the presented filter has several advantages, which can be summarized by: reducing the size by winding many coils through magnetic integration, attenuating the switching frequency and its multiple harmonics that reduce the current total harmonic distortion, assuring durability against the filter parameters differences, and preserving system stability under transient conditions. The proposed filter can become a promising trap filter based on these advantages. Simulation models of an ac/dc single‐phase traction rectifier with the proposed filter were created and tested in MATLAB/Simulink, verifying its superiority. Finally, the filter is validated by performing hardware‐in‐the‐loop experiments.