Abstract

AbstractElectron beam (EB)‐induced graft polymerization is advantageous for the surface modification of fabrics. We investigated the effect of monomer concentration and the addition of alkyl groups on the oil repellency of polyethylene terephthalate (PET) fabrics treated with monomers containing fluoroalkyl groups through EB‐induced graft polymerization via pre‐irradiation. We use 2‐(perfluorohexyl) ethyl acrylate (FEA) and stearyl acrylate (SA(C18)) with long alkyl chains as vinyl monomers to induce reaction with radicals generated from EB irradiation. The weight gain and surface morphology of the PET fabrics change with the FEA monomer concentration. The uniformity of the EB‐grafted PET fabric surface is determined at low monomer solution concentrations. Results of X‐ray photoelectron spectroscopy analysis show that adding 0.1 mol/L of FEA monomer to the EB‐grafted PET fabric yields the highest dodecane contact angle of 93.4° and a surface fluorine concentration of 39.8%. The addition of SA(C18) monomer to the FEA monomer decreases the dodecane contact angle by 77.5° and yields a surface fluorine concentration of 19.1%. EB graft polymerization via pre‐irradiation results in a uniformly treated surface, and stable oil repellency is achieved when using solely the FEA monomer at a lower monomer concentration than that used in a similar irradiation method reportedly previously.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call