Enhancing heat-driven acoustic characteristics of standing wave thermoacoustic engines by using corrugated stack

Abstract

The present work considers the heat-driven acoustic characteristics and dynamic thermal-fluid flow fields of a standing-wave thermoacoustic engine (SWTAE) by using sinusoidally shaped corrugated stack surfaces. 3-D numerical SWTAE models are developed and validated, aiming to examine the heat-driven acoustic effects caused by different corrugation amplitudes and wave-lengths of the sinusoidal stack surface. The results demonstrate that corrugated-shaped stack channels increase the contact area of the working gas in the stack area, and the thermos-acoustic conversion is more amplified. Compared to the SWTAE with uniform-shaped stack, the corrugated-shaped stack exhibit enhanced acoustic power output while maintaining a constant acoustic oscillation frequency. With the corrugation peak and wave-length of the sinusoidal stack are 2 and 0.2 mm, respectively, the amplitude and acoustic power of the acoustic pressure oscillations increase by 10.12% and 17.31%, respectively, in comparison with that of the conventional SWTAE. However, when the corrugation peak exceeds 0.4 mm, stronger nonlinear acoustics and flow effects are observed in the stack channels, leading to a reduction in the heat-driven acoustic power output, and thermo-acoustics energy conversion efficiency. The developed model highlights the effects of the corrugated-shaped stack on enhancing acoustic power output and thermo-acoustic conversion efficiency.