Enhancing Fused Deposition Modeling Precision with Serial Communication-Driven Closed-Loop Control and Image Analysis for Fault Diagnosis-Correction.

Abstract

Additive manufacturing (AM) also commonly known as 3D printing is an advanced technique for manufacturing complex three-dimensional (3D) parts by depositing raw material layer by layer. Various sub-categories of additive manufacturing exist including directed energy deposition (DED), powder bed fusion (PBF), and fused deposition modeling (FDM). FDM has gained widespread adoption as a popular method for manufacturing 3D parts, even for heavy-duty industrial applications. However, challenges remain, particularly regarding part quality. Print parameters such as print speed, nozzle temperature, and flow rate can significantly impact the final product's quality. To address this, implementing a closed-loop quality control system is essential. This system consistently monitors part surface quality during printing and adjusts print parameters upon defect detection. In this study, we propose a simple yet effective image analysis-based closed-loop control system, utilizing serial communication and Python v3.12, a widely accessible software platform. The system's accuracy and robustness are evaluated, demonstrating its effectiveness in ensuring FDM-printed part quality. Notably, this control system offers superior speed in restoring part quality to normal upon defect detection and is easily implementable on commercially available FDM 3D printers, fostering decentralized quality manufacturing.