Enhancing concrete performance: Surface modification of recycled coarse aggregates for sustainable construction

Abstract

In this study, the researchers introduce an innovative method to enhance the utilization of recycled coarse aggregates (RCA) derived from construction and demolition waste (C&D) in sustainable concrete production. The presence of old cements mortar on the surface of these aggregates poses a challenge to their mechanical properties. To tackle this issue, the researchers propose a unique approach that combines chemical treatment and abrasion techniques. Firstly, RCA is immersed in a 0.5 mol hydrochloric acid (HCl) solution, weakening the adhering mortar. Subsequently, abrasion treatment removes the weakened mortar from the RCA surface. The study explores the incorporation of these surface-modified RCAs at varying levels, from 0% to 100% in 25% increments. Various concrete properties, including workability, compressive strength, flexural strength, split tensile strength, and microstructural characteristics (XRD, SEM, and EDAX), along with modulus of elasticity, are assessed. Results indicate that the combination of these modification techniques significantly enhances RCA properties. At the 100% replacement level, surface-modified RCA results in a reduction of compressive, flexural, and split tensile strength by 08.31%, 10.61%, and 07.90%, respectively, in comparison to the reference concrete. Likewise, the modulus of elasticity decreases to 30.82, and porosity decreases to 27.82% at the same replacement level. However, SEM analysis illustrates improved bonding between RCA and cement matrix due to surface modifications, leading to reduced porosity and the formation of dense Interfacial Transition Zones (ITZs). Cost analysis reveals that recycled aggregate concrete (RAC) mixtures can be more economical than those utilizing natural aggregates (NA). In summary, this novel surface modification technique presents a promising avenue for optimizing RCA utilization in sustainable concrete production, promoting environmental conservation, and efficient waste management in the construction sector.