Abstract

A synergistic UV/TiO2/Fenton (PCF) process is investigated for the degradation of ibuprofen (IBP) at circumneutral pH. The IBP decay in the PCF process is much faster than that with the conventional UV, UV/H2O2, Fenton, photo-Fenton, and photocatalysis processes. The kinetics analysis showed that the IBP decay follows a two-stage pseudo-first order profile, that is, a fast IBP decay (k1) followed by a slow decay (k2). The effects of various parameters, including initial pH level, dosage of Fenton's reagent and TiO2, wavelength of UV irradiation, and initial IBP concentration, are evaluated. The optimum pH level, [Fe2+]0, [Fe2+]0/[H2O2]0 molar ratio, and [TiO2]0 are determined to be approximately 4.22, 0.20 mmol/L, 1/40, and 1.0 g/L, respectively. The IBP decay at circumneutral pH (i.e., 6.0–8.0 for wastewater) shows the same IBP decay efficiency as that at the optimum pH of 4.22 after 30 min, which suggests that the PCF process is applicable for the treatment of wastewater in the circumneutral pH range. The lnk1 and lnk2 are observed to be linearly correlated to 1/pH0, [IBP]0, [H2O2]0, [H2O2]0/[Fe2+]0 and ln[TiO2]0. Mathematical models are therefore derived to predict the IBP decay.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.