Abstract

Genetic manipulation of the undecylprodigiosin-producing strains and engineered culture medium approaches were applied as the most economical induction strategy for improving production. The hyper-producing recombinant strain ALAA-R20 was obtained after applying protoplast fusion strategy between the potent producer marine endophytic strains Streptomyces sp. ESRAA-10 (P1) and Streptomyces sp. ESRAA-31 (P2) of Dendronephthya hemprichi. Recombinant strain ALAA-R20 produced undecylprodigiosin yield higher than its parental strains ESRAA-10 and ESRAA-31 by 82.45% and 105.52% under submerged fermentation using modified R2YE medium. In order to reduce the costs of producing undecylprodigiosin, a solid-state fermentation (SSF) was applied. Scaled-up of optimized SSF parameters consisting of groundnut oil cake (GOC) sized to 3mm, initial moisture content 80% with a mixture of dairy mill and fruit processing wastewaters (1:1), pH7.0, inoculum size equal to 3 × 105spores/g dry substrate (gds), incubation temperature 30°C, and 7-day incubation period yielded the highest yield of 181.78mg/gds of undecylprodigiosin by the recombinant strain Streptomyces sp. ALAA-R20. Extraction and purification of the pigment using the chromatographic techniques as well as mass spectral analysis exhibited maximum absorbance at 539nm which is physiological property of the undecylprodigiosin. Undecylprodigiosin was stable over a wide temperature ranged from - 20 to 35°C even after storage for 6months. The maximum yield and stability of pigment was obtained at the acidic pH (acidified methanol, pH4.0). Undecylprodigiosin obtained from the recombinant strain Streptomyces sp. ALAA-R20 demonstrated strong antimicrobial activity against all multidrug-resistant bacterial and fungal strains tested with minimum inhibitory, minimum bactericidal, and minimum fungicidal concentrations ranged between 0.5 and 4.0, 0.5 to 4.0, and 1.0 to 8.0μg/mL, respectively. It also showed complete inhibition of cancer cells; HCT-116, HepG-2, MCF-7 and A-549 at 5, 8, 4, and 7μM with IC50 equal to 2.0, 4.7, 1.2, and 2.8μM, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.