Abstract
AbstractEthanol was observed to improve the oxygen mass transfer rate into a well‐mixed bioreactor. The effects of impeller speed and ethanol concentration on the oxygen transfer from air to the water phase and on the average bubble diameter in a stirred tank bioreactor are reported and modelled. The results show that the oxygen mass transfer coefficient (kLa) increases from 0.002 to 0.017 s−1 (for distilled water) due to the increase of impeller speed from 135 to 600 rpm. With increasing ethanol concentration from 0 to 8 g/L, the oxygen mass transfer coefficients increase from 0.015 to 0.049 s−1 and from 0.017 to 0.076 s−1, for impeller speeds of 450 and 600 rpm, respectively. The average bubble diameter decreased from 7.0 mm to 1.7 mm in pure distilled water as the impeller speed was increased from 135 to 600 rpm. When ethanol was present in the aqueous phase, the bubble diameter fell from 6.0 mm to 0.6 mm as the impeller speed was similarly increased.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
