Abstract
PurposeThis paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method.Design/methodology/approachPhotocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN- degradation.FindingsComplete removal of 50 mg/L cyanide was obtained in 4 min in an ozone/UV/PMS process. The cyanide removal increased from 49.3% to 100% by adding the persulfate dosage up to 100 mg/L. The effect of various cations (II) on the cyanide degradation was enhanced in the order Cu2+ > Co2+ > Fe2+. Hydroxyl radical based on different radical quenchers such as salicylic acid proved as the main oxidizing radical for oxidation. The application of ozone/UV/PMS to treat wastewater containing cyanide shows high degradation efficiency.Research limitations/implicationsThe ozone/UV/PMS system could be a process for degradation and detoxification of cyanide.Practical implicationsThis study provided a simple and effective method for degradation of cyanide from aqueous solution. This method was applicable to protect environment from a huge amount of toxic cyanide wastewater produced by different industrial processes.Originality/valueThe PMS activation is done via a simple and effective method, which is carried out with the ozone/UV system. There are two main innovations. One is that the novel catalytic role of bimetallic ions in the ozone reaction with cyanide and the further decomposition of intermediate products is investigated. The other is that the optimized conditions were obtained for the removal of cyanide as a water contaminant. Furthermore, predominant oxidizing species by PMS activation are identified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.