Abstract
S-doped g-C3N4/TiO2 nanoparticle composites (TCNS) were generated by successfully calcinating a compound of thiourea and TiO2 at 550 °C; these composites serve as a promising photoanode material for dye-sensitized solar cells (DSSCs) with improved efficiency. TEM, HRTEM, XRD, UV–Vis and FTIR results showed that the surfaces of TiO2 nanoparticles were coated with a thin layer of sulfur-doped g-C3N4. The corresponding photoelectrochemical properties of the fabricated DSSCs were also studied. The DSSCs based on the TCNS photoelectrode shows a ratio of 4.87% in converting light into electricity, a short-circuit photocurrent of 10.41 mA cm−2, and an open-circuit voltage of 0.65 V, qualities which were well above those of DSSCs based on un-doped TCNS. The significant enhancement in DSSC performance is mainly due to the suppression of the recombination of electron–hole (e−–h+) pairs, suppression which also leads to an increase in open-circuit photovoltage, as well as photocurrent density under short circuit by the layer of sulfur-doped g-C3N4. Additionally, electrochemical impedance spectroscopy analysis proved that the electron transfer resistance is considerably reduced, and this reduction increases the power conversion efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.