Enhancement of phosphorus removal with near-neutral pH utilizing steel and ferronickel slags for application of constructed wetlands

Abstract

The objective of this study was to enhance phosphorus (P) removal while achieving near-neutral pH in aqueous solution utilizing steel slags (Blast furnace slag, BFS; Basic oxygen furnace slag-air cooling, BOFS-A; Basic oxygen furnace slag-rapid cooling, BOFS-R) and ferronickel slag (FNS) for application to constructed wetlands (CWs). The maximum P adsorption capacities (mgkg−1) of the slags were in the order BOFS-R (3233)>BOFS-A (2320)≫BFS (607)>FNS (260) based on the Langmuir adsorption isotherm. The pH of the slags were in the following order: BOFS-R (11.9)>BOFS-A (9.0)≫BFS (8.9)>FNS (7.5). The basic oxygen furnace slags had the highest P adsorption capacity, while the ferronickel slag had the lowest pH among the tested slags. To achieve high P removal efficiency with near-neutral pH, the BOF slags and ferronickel slag (BOFS-A+FNS and BOFS-R+FNS) were mixed in batch experiments. To achieve effective P removal with near-neutral pH utilizing steel and ferronickel slags, the optimum conditions were found to be the ratio of BOFS-R:FNS of 7:3. Therefore, when mixed slags at the BOFS-R:FNS ratio of 7:3 were applied to CWs, they could achieve high P removal efficiency and near-neutral pH for meeting the acceptable drinking water quality discharge standard.